Need an ME for metal C channel cap for avionics module

[Andrew Greenberg]

Hi! We need to rebuild the caps for the C channels in the avionics
module. These caps keep the radios in the avionics modules in their own
little faraday cages. It's a pretty simple thing (I think!) but it has
to be made out of metal, either sheet or milled out of a chunk of Al.

I don't think it's a huge project, but it's now critical path to launch
for the new telemetry system. If anyone is willing to take this on,
could you drop me an email? Bonus points if you can come to the 84 Lab
right now (we're here until about 5pm).

Oh, unless we're at the drop tower - we're dropping the avionics module
today!

Thanks!

Andrew

[Dave Camarillo]

Just a note, the 1Kw ME laser cutter would be perfect for making these...
Thin sheet is fine for these parts...

Post by Andrew Greenberg
Hi! We need to rebuild the caps for the C channels in the avionics
module. These caps keep the radios in the avionics modules in their own
little faraday cages. It's a pretty simple thing (I think!) but it has
to be made out of metal, either sheet or milled out of a chunk of Al.
I don't think it's a huge project, but it's now critical path to launch
for the new telemetry system. If anyone is willing to take this on,
could you drop me an email? Bonus points if you can come to the 84 Lab
right now (we're here until about 5pm).
Oh, unless we're at the drop tower - we're dropping the avionics module
today!
Thanks!
Andrew
--
-------------------------------------------------------
Andrew Greenberg
Portland State Aerospace Society (http://psas.pdx.edu/)
-------------------------------------------------------
_______________________________________________
psas-airframe mailing list
http://lists.psas.pdx.edu/mailman/listinfo/psas-airframe

[Samuel Arnold]

ME Capstone can do this with some other laser cutting jobs. Need part drawing and material!

Sam

Just a note, the 1Kw ME laser cutter would be perfect for making these... Thin sheet is fine for these parts...
Hi! We need to rebuild the caps for the C channels in the avionics
module. These caps keep the radios in the avionics modules in their own
little faraday cages. It's a pretty simple thing (I think!) but it has
to be made out of metal, either sheet or milled out of a chunk of Al.
I don't think it's a huge project, but it's now critical path to launch
for the new telemetry system. If anyone is willing to take this on,
could you drop me an email? Bonus points if you can come to the 84 Lab
right now (we're here until about 5pm).
Oh, unless we're at the drop tower - we're dropping the avionics module
today!
Thanks!
Andrew
--
-------------------------------------------------------
Andrew Greenberg
Portland State Aerospace Society (http://psas.pdx.edu/)
-------------------------------------------------------
_______________________________________________
psas-airframe mailing list
http://lists.psas.pdx.edu/mailman/listinfo/psas-airframe
_______________________________________________
psas-airframe mailing list
http://lists.psas.pdx.edu/mailman/listinfo/psas-airframe